Trimm Solo

Tent care after a hike: drying, cleaning and storage

A tent’s trip does not end when it goes into the car. Set aside a separate drying and inspection stage at home. A complete, organised shelter lets the next journey start with route planning instead of missing pegs or damp fabric. A clear sequence is especially helpful after a rainy weekend.

Separate transport packing from storage

You may need to pack a wet tent for the journey home, but do not leave it in that state. Remove the fly, inner and footprint. Spread or hang them in a suitable ventilated place without straining the fabric. Check damp folds and corners separately. Do not judge drying only by elapsed time: the actual condition of the material matters.

Clean only as much as necessary

Shake out sand and remove loose dirt first. Find the care instructions for your model before washing. MSR does not recommend washing machines or tumble dryers for its tents; gentle hand cleaning differs from an ordinary clothing wash. If a cleaner is needed, choose one approved for the specific fabric and coating.

Every outing does not automatically require a complete wash. A small muddy patch and a heavily soiled shelter may need different levels of attention. After wet cleaning, dry the treated areas completely again. Check that the storage sack is dry too before bringing all the pieces together.

Inspect parts while everything is visible

  • Count the pegs against the original component list.
  • Inspect poles, joints and the elastic cord.
  • Check zips, guylines and attachment points.
  • Record any damage and photograph its location.

If a coating is sticky or flaking, do not choose a random sealant. Ask about repair options for that particular material first. Keep the component list with the model name and instructions, so replacements can be identified accurately.

Store it for the next trip

Choose a dry, cool place away from direct sunlight. MSR recommends a roomy, breathable storage bag. Position pegs so they cannot damage the fabric and continue following your model’s packing guidance. Open and check the complete kit well before your next departure, rather than discovering a problem on the morning you leave.

Common questions

Is a tent ready once the outside feels dry?

Check the underside, edges, seams and connection points too. One dry surface does not tell you that the entire shelter is dry.

Does a missing peg mean replacing the tent?

Look for a compatible spare first. Compare its dimensions, construction and the intended use specified by the manufacturer.

Browse tent accessories and tents according to the need identified during your inspection.

Sources

MSR guidance on keeping a tent dry, cleaning and storage.

Related hiking guides

Back to blog